Seam Roller for Quilting and Sewing Projects
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I modeled this simple seam roller for my wife after being disappointed by a print-in-place model I found elsewhere.
- Ocena
- 0 / 5
- Polubienia
- 31
- Pobrania
- 70
- Wydruki
- 0
- Wyświetlenia
- 396
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
My wife asked me to make her a seam roller, so you might as well have it as well!
Barrel is 25mm (~1 inch) wide and 25mm diameter, grip is a rectangular profile, so it's not super ergonomic, but it takes pressure well.
Rather than have to fuss with getting the right hardware, I opted to use bamboo skewers and super glue for assembly (two through the handle and one as the shaft for the barrel).
I'd recommend changing your seam alignment to random so that the barrel doesn't have a prominent seam which means it will roll smoothly as well. I used 15% infill. Be sure to split the model into pieces rotate them as shown in the screenshot.