Quilting triangle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 45/90 degree triangle template for quiltmakers, with ruler markings for inches, 1/2 inches and 1/4 inches. It is about 3/16 inch thick.
A friend of my wife requested this, and I saw it as an interesting challenge. It was designed using Fusion 360.
I printed it face down (for a clean top surface) with a color change at the first layer above the cutouts. I then switched back to the original color after 3 layers of black. I'm sure it would work as a single color model too.
The lines are quite narrow, and the numbers very small, so proper tuning is critical. In fact, for best results I would recommend using a smaller nozzle.