Canon LP-E17 Battery & SD Card Combo Gridfinity Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity 1x3 box for storing up to 6 LP-E17 batteries and 5 SD cards.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 176
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple Gridfinity 1x3 box for storing up to 6 Canon LP-E17 batteries (or any batteries that are 36mm x 16mm – I would say 34x14mm if your tolerances aren't tight) and 5 SD cards.
The layout is intended to allow for simultaneous charging of all batteries if you use for example Palo LP-E17 high capacity batteries with USB-C charging, hence the 3x2 grid.
I printing this with Sunlu PLA+ White at 0.2mm. Infill shouldn't really matter and won't save you much in the way of filament. I used 15% infill.
Thrown together using Tinkercad then imported into https://gridfinitygenerator.com/en/box