Canon LP-E17 Battery & SD Card Combo Gridfinity Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Gridfinity 1x3 box for storing up to 6 LP-E17 batteries and 5 SD cards.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 44
- Makes
- 0
- Views
- 176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple Gridfinity 1x3 box for storing up to 6 Canon LP-E17 batteries (or any batteries that are 36mm x 16mm – I would say 34x14mm if your tolerances aren't tight) and 5 SD cards.
The layout is intended to allow for simultaneous charging of all batteries if you use for example Palo LP-E17 high capacity batteries with USB-C charging, hence the 3x2 grid.
I printing this with Sunlu PLA+ White at 0.2mm. Infill shouldn't really matter and won't save you much in the way of filament. I used 15% infill.
Thrown together using Tinkercad then imported into https://gridfinitygenerator.com/en/box