Customisable Air Pot - grow your plants faster!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grow your plants faster, bigger and stronger with this scientifically proven pot
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 362
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update - 20/05/2025
This is my first version (more to come) of my opensource air pot.
These style pots allow you to grow plants quicker due to the soil and roots getting more oxygen and is a proven science!
I designed this around a basic concept; I dont want to replant my plants when I want to change the colour of my pots or style of the pots I use so this model contains:
1. Drip tray with location gaps for the,
2. Main body which sits on top of the Drip tray and be easily lifted off for maintenance but also it allows air to flow between, and underneath. This means no moldy trip trays and lots of oxygen around the plant roots.
3. The star - a vase mode printed plant core with air holes and drainage. Plant in here and never replant again (unless your plants get too big).
4. NOT DONE YET…. coming soon
Air gaps between all the pieces
-------------------------------
I am currently trying to figure out how to do the thread or connection method around the Main body to connect a decorative shell. This shell will be easily swappable and thus you can change the colours of your pots and the shapes easily without having to reprint the Drip tray, Main body or plant core.
------------------------------
Print settings:
Print in PLA if you wish.
I printed my tests at 0.3 layer height (plant core was at 0.2) - 2 or 3 walls for drip tray and main body (your choice).
- Main body needs to be printed upside down (top on the bed)
- Plant core - 5 bottom layers, in Orcaslicer add negative cylinder and center to model and make height 2mm. Turn on vase mode (spiral printing) and smooth spiral. In the preview you should see a FLAT bottom with a hole for drainage
---------
Alternatively the plant core #3 can be printed with 2 walls, 0 top layers, 0 infill and 4-5 bottom layers and NO supports. You still need to add the negative part in the slicer as per the the above instructions.