1 / 3
Festool OF 1010 REQB copy sleeve — zdjęcie 1
1 / 3

Festool OF 1010 REQB copy sleeve

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Interchangeable copy sleeve for Festool OF1010 REQB

Ocena
0 / 5
Polubienia
4
Pobrania
62
Wydruki
0
Wyświetlenia
280
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

Update V9:

 

While using V7 I found out that the sleeve to easily slips thru. So I created a new Version which is inserted from the bottom side. The chamfer is a stopper for the insert and ensures prinability of the part without support. Please use V9. I will keep V7 for everyone who already printed and looks for replacment. Size of the hole in the base also increased to allow  bigger rings if needed

 

simple copyring for Festool OF1010 with interchangable sleeves 

I added sleeves with slighly different outer diameter. I found out that my prints of the outer diameter with a Bambulab P1P where about 0.2 mm  off. But its only off in the outer diameters. Maybe I could change some printsettings to control outer diameter better.

Nevertheless I decided just to increase the nominal diameter of the outer diameter by 0.2 so the 20.2 Version will print perfect 20mm.

I maked the “real” size on the prints, so if a sleeve wears out you know which version to print again.

If you need other tolerances or sleeve sizes wirte me a message, and I will provide more formats. Also if you would like a deeper sleeve. I made the 4mm because I use printed templates which I don't like to print thicker as neccesarry. 

Tagi