Hydroponics: channel supports for 90mm Veranda post sleeve
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are a collection of single or double posts at various heights for Veranda PVC post sleeves for NFT growing,
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
These fit come in a single channel or double channel (pictured) variety, and can be used to keep a hydroponic NFT channel at the right pitch (in this case a 90mm pvc sleeve from Veranda that you can find at Home Depot).
I used https://www.homedepot.com/p/Veranda-4-in-x-4-in-x-8-ft-Vinyl-Coated-Pressure-Treated-Pine-Fence-Post-with-Post-Cap-141601/203179280 when they were on sale.
Pick a single or double support of the right height (they come in 10mm increments), and combine with a foot (10 to 25mm height) in order to get to the precise height you need. In my case, i printed the support cradles first (biggest size that fits, then subtracted 10mm), then measured down from the cradle (when attached to the channel), to the surface below, in order to get the exact height of the foot i needed to print for that location.
Use with these endcaps: https://www.printables.com/model/1279690-hydroponics-90mm-endcap-for-veranda-vinyl-post
Printed in PETG, 3 perimeters, 15% infill, no supports.