Hydroponics: channel supports for 90mm Veranda post sleeve
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are a collection of single or double posts at various heights for Veranda PVC post sleeves for NFT growing,
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 275
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Share Alike
These fit come in a single channel or double channel (pictured) variety, and can be used to keep a hydroponic NFT channel at the right pitch (in this case a 90mm pvc sleeve from Veranda that you can find at Home Depot).
I used https://www.homedepot.com/p/Veranda-4-in-x-4-in-x-8-ft-Vinyl-Coated-Pressure-Treated-Pine-Fence-Post-with-Post-Cap-141601/203179280 when they were on sale.
Pick a single or double support of the right height (they come in 10mm increments), and combine with a foot (10 to 25mm height) in order to get to the precise height you need. In my case, i printed the support cradles first (biggest size that fits, then subtracted 10mm), then measured down from the cradle (when attached to the channel), to the surface below, in order to get the exact height of the foot i needed to print for that location.
Use with these endcaps: https://www.printables.com/model/1279690-hydroponics-90mm-endcap-for-veranda-vinyl-post
Printed in PETG, 3 perimeters, 15% infill, no supports.