ROSA3D FILAMENTS SMALL SPOOL'S ADAPTER for AMS
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small spool's adapter for 300 g spools by ROSA3D FILAMENTS
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 135
- Wydruki
- 4
- Wyświetlenia
- 949
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Do you want to use our small spools in AMS?
Are you looking for an adapter with our Masterspool design?
Look no further, we designed small spool's adapter compatible with AMS.
Comparing to other adapters our solution is unique. It has been designed in such a way that it can only be produced using 3D printing: print-in-place and spring mechanism manufactured in one operation. It is also very easy to store, it is almost flat. The adapter also looks like our Masterpool!
HOW TO PRINT?
The adapter can be printed with PLA, choose printing profile 0.2 mm, no supports required.
HOW TO USE?
After printing take a disc with spring mechanism and gently bend it to realese the springs.
Take other disc and check if pillars are movable.
ASSEMBLY
Take disc with pillars and put it on the table in the direction as in the video below. The pillar without a hole should be pointing upwards.
Put the pillars up.
Insert small spool. Make sure the hole on the small spool is in the same position as the top post.
Insert the second disc and simultaneously retract the spring mechanism.
Enjoy!