1 / 28
Top spool holder for Creality K1SE/K1C/K1 with additional functionality
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
See below
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 160
- Wydruki
- 0
- Wyświetlenia
- 1528
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (20)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (43)Powiązane
This holder was developed based on the experience gained during using of “Creality K1 & K1C top mounted filament spool holder”.
Main characteristics of the holder:
- Quick installation and dismantling of the holder on a 3D printer with magnets;
- Quick spool change without dismantling of the holder;
- Built-in, quick-release guide for the filament, preventing it from falling off the spool;
- built-in elements for organizing 3D printers head cable support;
- Holding the tube when printing from the dryer;
- Reduced material consumption.
Additional accessories:
Ten (10 pcs) M3x8 screws and 28 pcs 5(d)x3(h) cylindrical magnets are required for assembly.
Magnets are glued into the bases and onto the upper edge of the printer body. I used epoxy glue for this purpose.
Printed templates are used to glue magnets to the printer body. Their 3D models are included in the package.