DIN Rail enclosure for Lilygo T-CAN-485 Module
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
DIN Rail enclosure for Lilygo T-CAN-485 Module (modified for soldered expansion pins)
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
I took the wonderful work by CMDRTheoJones and just made a simple modification to allow the use of a 90 degree pins soldered to the expansion ports. Although the cut out existed sliding the board in was a little difficult due to the usb-c port. Therefore I cut out the top section of the case above the board and attached it to the lid. Everything else is the same as you can't improve on perfection :)
And to give other credit for the DIN mechanism as taken from CMDRTheoJones' page:
"The excellent DIN Rail mechanism by CeltXRobotics was used for the lever, with some slight re-work."