DIN Rail enclosure for Lilygo T-CAN-485 Module
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
DIN Rail enclosure for Lilygo T-CAN-485 Module (modified for soldered expansion pins)
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 101
- Makes
- 0
- Views
- 387
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
I took the wonderful work by CMDRTheoJones and just made a simple modification to allow the use of a 90 degree pins soldered to the expansion ports. Although the cut out existed sliding the board in was a little difficult due to the usb-c port. Therefore I cut out the top section of the case above the board and attached it to the lid. Everything else is the same as you can't improve on perfection :)
And to give other credit for the DIN mechanism as taken from CMDRTheoJones' page:
"The excellent DIN Rail mechanism by CeltXRobotics was used for the lever, with some slight re-work."