Jacuzzi diverter valve part
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is for an old Jacuzzi sand filter diverter valve.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
This is for an old Jacuzzi pool sand filter diverter valve model 24LT3 from the mid 1970s.
I don't expect much downloads but I hope it helps someone save their functional filter for another decade since parts are no longer available.
The original center piece was made of metal covered with a rubber seal. It rusted badly and the seals remnants jammed the valve. First trial was made of PETG with normal settings but it leaked water through the print. This one works just fine (perimeter 8, vert and horz walls to 8 layers, 0.7mm, infill 40% gyroid with solid infill every 10 layers). It is watertight but took the original 5h print time to 15h!