Jacuzzi diverter valve part
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€11.29 – €13.80 net (excluding VAT)
For file: pool valve v2_0.1mm_PETG_MK3S_15h18m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €12.55 excluding VAT (range midpoint).
- Weight reported by the author
- 107 g
- Print time reported by the author
- 15.29 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is for an old Jacuzzi sand filter diverter valve.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 77
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
This is for an old Jacuzzi pool sand filter diverter valve model 24LT3 from the mid 1970s.
I don't expect much downloads but I hope it helps someone save their functional filter for another decade since parts are no longer available.
The original center piece was made of metal covered with a rubber seal. It rusted badly and the seals remnants jammed the valve. First trial was made of PETG with normal settings but it leaked water through the print. This one works just fine (perimeter 8, vert and horz walls to 8 layers, 0.7mm, infill 40% gyroid with solid infill every 10 layers). It is watertight but took the original 5h print time to 15h!