Ladder feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design and 3D print of ladder feet to replace damaged ones
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 753
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired from different published designs there:
https://www.prusaprinters.org/prints/65328-ladder-antislip-shoe
https://www.prusaprinters.org/prints/77106-rubber-boot-for-frz-ladder-leiterfuss-fur-frz-leit
https://www.prusaprinters.org/prints/103043-ladder_feet_40x23mm
I created with Fusion 360 my own feet adapted to my ladder
Printed in PETG Prusament Urban Grey which is soft enough not to slip too much on the floor. For sure would be better to use Flex filament instead
On top of .stl and .3mf files I uploaded Fusion 360 .f3d one so you can modify the design and adapt it to your needs
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes
Enjoy
If you like this model, take a look also at my other designs