Canon 400mm DO IS L lens foot extender
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hate holding your long lens with a tiny lens foot? This model fixes that issues for the Canon 400mm DO IS L lens.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The downside of my Canon 400mm DO IS L lens is that the lens foot is teeny tiny and a pain to hold especially with a teleconverter mounted. This model extends the foot over 100 mm and mounts with a screw. Obviously you would want to use a few walls (perimeters) and plenty of infill with a strong filament like Nylon, ABS, ASA, or maybe even PETG. I printed mine with a Nylon 6 with 20% glass fill filament and it feels rock solid.
This may fit other similar lenses ( Canon 300mm / 400mm f/2.8) but more than likely the hole for the lens foot would be off.