Soaker Hose Retainer Spikes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple & effective solution for keeping your soaker hoses in line.
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 85
- Wydruki
- 1
- Wyświetlenia
- 282
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My soaker hose kept bending away from where I wanted it thanks to the sun's heat, occasionally landing on my delicate seedlings, so I made these hooked soil spikes to hold it down. Now my soaker hose stays where I put it, and my seedlings are all the better for it!
Personally, I prefer the longer spikes as they stay in the ground better, but there are also shorter spikes for you to choose from, as well as single & double spike variants. The ones with longer tops are useful for covering sections of the hose that seem to have a bunch of pinholes spraying water upwards.
These spikes have an inner diameter of 8mm and will easily fit over a 3/8 inch soaker hose.
Print Settings
- Nozzle - 0.4mm
- Layer Height - 0.2mm (Feel free to use 0.3mm draft to print faster, the spikes are light on details anyway)
- Material – PETG (For heat resistance & strength)
- Infill — 15% Cubic
- Perimeters – 2 or 3 (I've found that 2 works well enough, but you can use 3 or more for increased rigidity)
- Top/Bottom Fill Pattern – Whatever strikes your fancy.