Cooler Master Praetorian PAC-T01-E1 Replacement Foot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feet broke off and went missing? Damaged? Just print new ones!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Long story short, I got one of these Praetorian cases in that had been used (apparently) at a trade show by Nvidia (as their logo was etched into the side panel), and in the process of restoring it I found half the feet were missing, and the remaining two weren't looking so hot.
Of course, we live in a world of 3D printing, so this would be an easy fix. I designed these to accept 1.5" (or 38mm) self-adhesive felt pads, but feel free to use whatever you want, here. Fit will be a little tight on the pads, but pressing them in should work.
The hole at the top is just big enough for a standard coarse-thread PC screw to go through (which is what the Praetorian uses to secure the feet to the bottom of the case).
Printed these on a Bambu A1, 0.4mm nozzle, 0.2mm layer height (standard), PLA or PETG, your choice. 15% infill.