Cooler Master Praetorian PAC-T01-E1 Replacement Foot
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Feet broke off and went missing? Damaged? Just print new ones!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Long story short, I got one of these Praetorian cases in that had been used (apparently) at a trade show by Nvidia (as their logo was etched into the side panel), and in the process of restoring it I found half the feet were missing, and the remaining two weren't looking so hot.
Of course, we live in a world of 3D printing, so this would be an easy fix. I designed these to accept 1.5" (or 38mm) self-adhesive felt pads, but feel free to use whatever you want, here. Fit will be a little tight on the pads, but pressing them in should work.
The hole at the top is just big enough for a standard coarse-thread PC screw to go through (which is what the Praetorian uses to secure the feet to the bottom of the case).
Printed these on a Bambu A1, 0.4mm nozzle, 0.2mm layer height (standard), PLA or PETG, your choice. 15% infill.