1 / 1
IK Japan 1979 Magnifying glass fix — zdjęcie 1

IK Japan 1979 Magnifying glass fix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple clamp to reattach the handle of this IK magnifying glass.

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
27
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

The handle of my Dad's magnifying glass broke off, so this is a clamp to put it back together.
Probably nobody will ever need to repair this.

This is for the larger version of the IK magnifying glass, around 110mm iirc. 

The original metal connector is very thin and likely brittle after so many years, this should brace it into place depending on where the metal piece broke.

I used 2 x 20mm long m3 Countersunk bolts, secured with m3 nuts.

Piece 1 should print without support (although I used a very fine layer height)

Piece 2, I forget if the m3 nut receiver needs support, may be difficult to remove supports from such a small hole. Depends how your printer handles printing overhangs/mid air I guess.

Tagi