IK Japan 1979 Magnifying glass fix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple clamp to reattach the handle of this IK magnifying glass.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 27
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The handle of my Dad's magnifying glass broke off, so this is a clamp to put it back together.
Probably nobody will ever need to repair this.
This is for the larger version of the IK magnifying glass, around 110mm iirc.
The original metal connector is very thin and likely brittle after so many years, this should brace it into place depending on where the metal piece broke.
I used 2 x 20mm long m3 Countersunk bolts, secured with m3 nuts.
Piece 1 should print without support (although I used a very fine layer height)
Piece 2, I forget if the m3 nut receiver needs support, may be difficult to remove supports from such a small hole. Depends how your printer handles printing overhangs/mid air I guess.
