SKADIS pegboard corner plates for BROR shelves
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapted from 3DJake's pegboard concept, split into left/right parts for easier printing
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 343
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
I found it challenging to print the original pegboard plates in any orientation, so I redesigned them in two parts to slot together. I only have the one BROR so didn't need the dual plates and just focused on the corner aspect.
The M5x16 bolts now screw through two plates, which keeps things quite nicely in place and aligns the plates without any extra effort beyond a bit of bending to get them in place. The M5 nuts also seem to align with the BROR square nut slots which means you don't need to hold the nut from behind to tighten it.
Printed with Bambu PETG-HF, with the outside face on the bed and supports used for some of the mounting hole features (so support interface will be hidden from view once mounted)
I also really like the texture the Bambu textured bed gives to the surface of the pegboard.