Support elements to stabilize an ageing hydroponic tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Support elements to stabilize an ageing tower. It works with the 5-pot tower segment.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 266
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Update 31.05.2025:
There is now a sealing ring that is placed between the individual elements. This ring additionally stabilizes the tower. The sealing ring have to be printed in TPU!
My tower is getting on in years and the individual elements now fit together very loosely. The tower is no longer rigid enough and is starting to tilt. The reinforcement rings are intended to support the individual elements again. The rings can simply be slipped over the individual elements.
Easy to print, no supports required.
The following video will explain the actual issue.