Retevis Rt27 18650 Battery Box with USB C Charger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ten model jest dostępny do pobrania na Cults3D: 👉 https://cults3d.com/en/3d-model/gadget/retevis-rt27-18650-battery-box
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 191
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
⚠ Ten plik .stl to tylko placeholder – właściwy model do pobrania znajduje się tutaj:
👉 https://cults3d.com/en/3d-model/gadget/retevis-rt27-18650-battery-box-with-usb-c-charger
⚠ Ten projekt jest płatny i dostępny wyłącznie na Cults3D:
https://cults3d.com/en/3d-model/gadget/retevis-rt27-18650-battery-box-with-usb-c-charger
This is a housing for the PMR Retevis RT27 radio with a USB C charging socket
The photos show step by step how it is assembled.
You will need charging modules with protection, a 18650 cell, double-sided tape, a copper plate, a piece of filament to melt and secure the charging module and the plate from moving. You will also need 4 small screws.
3D printing settings
📐 Recommended parameters:
- Material: PLA / PETG
- Infill: 20%
- Layer height: 0.12 mm
🔒 No license – This is not an open source project