Retevis Rt27 18650 Battery Box with USB C Charger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ten model jest dostępny do pobrania na Cults3D: 👉 https://cults3d.com/en/3d-model/gadget/retevis-rt27-18650-battery-box
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 193
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
⚠ Ten plik .stl to tylko placeholder – właściwy model do pobrania znajduje się tutaj:
👉 https://cults3d.com/en/3d-model/gadget/retevis-rt27-18650-battery-box-with-usb-c-charger
⚠ Ten projekt jest płatny i dostępny wyłącznie na Cults3D:
https://cults3d.com/en/3d-model/gadget/retevis-rt27-18650-battery-box-with-usb-c-charger
This is a housing for the PMR Retevis RT27 radio with a USB C charging socket
The photos show step by step how it is assembled.
You will need charging modules with protection, a 18650 cell, double-sided tape, a copper plate, a piece of filament to melt and secure the charging module and the plate from moving. You will also need 4 small screws.
3D printing settings
📐 Recommended parameters:
- Material: PLA / PETG
- Infill: 20%
- Layer height: 0.12 mm
🔒 No license – This is not an open source project