Frankenstein - BLTouch rear mount - Anet A6
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fast to print BLTouch / 3DTouch sensor rear mount for the Anet A6 Frankenstein Mod.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was a fast hack to mount the BLTouch / 3DTouch sensor in the rear of the Frankenstein. I did not want the sensor in the front for nicer look.. but there are some problems:
- You can not longer use the full build plate, as the mount hits the frame
- You can not longer use the full building height, as the mount hits the frame
- The printers dimensions can be confusing sometimes
All of this is mitigated via configuration and the printer can be used safely, but you loose some buildspace. It was just a proof of concept and it's working so far.
Marlin - Configuration.h
// ANET A6 with BLTouch/3D-Touch mounted in rear of Frankenstein
#define NOZZLE_TO_PROBE_OFFSET { 0, 62, -1.15 }#define PROBING_MARGIN 0
// ANET A6 Frankenstein
#define X_BED_SIZE 205
#define Y_BED_SIZE 200
#define X_MIN_POS 7
#define X_MAX_POS 212
#define Y_MIN_POS -6
#define Y_MAX_POS 194
#define Z_MIN_POS 0
#define Z_MAX_POS 187
#if ENABLED(Z_SAFE_HOMING)
// Anet A6 with new X-Axis and defined X_HOME_POS -7, Y_HOME_POS -6
#define Z_SAFE_HOMING_X_POINT 112 // X point for Z homing
#define Z_SAFE_HOMING_Y_POINT 110 // Y point for Z homing (centered to probe)
#endif
It is mounted in the rear by using the two screws that connect the fan duct with the carriage.
Print Settings
Printer Brand: Anet
Printer: A6
Rafts: No
Supports: No
Resolution: 0,1 mm
Infill: 20%
Filament: Tinmorry PLA Plus Silk Silver
Notes:
Extremely easy to print.. just do it!