Varia Radar Mount for Ortlieb Quick Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to mount a Garmin Varia radar to an Ortlieb Quick Rack.
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 129
- Wydruki
- 1
- Wyświetlenia
- 1295
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Update, September 2026: New version out. It's better in some way, not as good in others.
The Ortlieb Quick Rack comes with a reflector mount, but I worry that it might rotate on rough terrain with a heavy load on it, so I made this mount that braces itself on two of the rack cross members and attaches with just a single zip tie. This is designed to fit the standard Quick Rack. There is a remix for the Quick Rack L: https://www.printables.com/model/1697472-varia-ortlieb-quick-rack-l-mount. It will not fit the Quick Rack Light, and will probably point too high on the Quick Rack XL.
This is designed to use generic Garmin computer mounts- aka: pucks- with 20mm or 21mm bolt spacing, or a BarFly puck, also for Garmin computers. There are versions for use with just the screws that usually come with the pucks using the screws to form their own threads in the plastic, or versions that also use a nut for better security, but you will probably need to use longer screws and find matching nuts.
The socket head cap screw in the pictures is only necessary if you use an adaptor that spaces the Varia computer a bit farther from the top of the puck. This prevents damage if the Varia get pushed from behind into the mount. Regular Varia radars/lights should lie relatively flat against the back of the mount.
23 May 2025- updated the size of the nut cutouts on the models with them. When printed vertically, they don't need to be oversize.