Modified part for Beacon knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Beacon knob itself does not stay in place and i did not want to use glue or two sided tape, so i modified the lever
- Ocena
- 4,6 / 5
- Polubienia
- 12
- Pobrania
- 82
- Wydruki
- 6
- Wyświetlenia
- 435
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
You need to swap the m3x10 screw to m3x12 screw to get enough depth for nyloc screw. This mod is really nice for good adhesion for knob to stay in place and it does not need any alterations for other parts. So you can reverse everything in original shape later on if needed.
Downside might be that there is possibility that the slider travel might be restricted just so slightly. that the actual limits are like 1-99 not entirely closed and not entirely open. This will not matter in grand scheme of things. So at some point, if possible, i or someone else might make a v2 of this.