CMF Phone 2 Pro generic threaded lens adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This allows use of both official add-on lenses and generic that use the 17mm thread mount with the CMF Phone 2 Pro
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 139
- Wydruki
- 1
- Wyświetlenia
- 1943
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Standard Digital File License
This is two parts - an lens mount insert that can use both the official CMF add-on lenses, but also generic ones that use a 17mm thread.
Corner plate to attach the lens holder without using a full rear plate.
The insert also works with my full rear plate as shown in photos.
Both print without special settings, minor support within the screw holes is needed, and ideally finer layer hight for the threads in the lens mount.
I tested with the cheapest set I found on Amazon, but any 17mm threaded ones should work with this. The fish eye in the kit I got isn't straight, but that's why it was cheap!