Liczymy pasujące modele…
Since I lost the original bezel on the first day, I have designed a 3D printable replacement with different bezel styles: - Flat. The bezel is a flat surface with a sharp edge on the outer diameter - Fillet. Has a fillet on the outer…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
After verifying several violations of the original license (CC-BY-NC-SA) applied to my models, I have decided to change the license used for my files. Although the new license (Standard Digital File License) would normally not allow…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nothing/CMF watch 2 Pro charging dock/stand
Wydruk około 3,75 €–4,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Official Universal Cover models for use with CMF Phone 2 Pro. The part is attached to the rear of CMF Phone 2 Pro with 4 M2 screws and our Accessory Point Cover (M2.5). Find device dimensions, screw sizes and more uploaded to support your…
Update: 26.07.2024 Added “cmf watch pro 2 stand 0,2mm” with a slightly larger opening for the connector. A charging Dock/Stand for the cmf watch pro 2 Printed at 0.2mm layer height in PLA. Tree supports used for overhangs. Not sure, if…
This is an original file of the 'basic' back cover of CMF Phone 1 and is optimised for printing. Buttons, camera surround, SIM tray and Accessory Point Cover are not included in the file. Please do not use any Nothing trademark, logos or…
I would like to share my magnetic charging station for the cmf watch pro 2 with you. The model is very easy to print without supports. Assembly instructions: 1. Lead the cable through the base part. 2. Position the cable with the magnetic…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
This is the remix from the original model to make the dock work with the CMF Watch Pro 3 :) Very few supports are needed (you can import the 3MF into your Slicer so that it opens up with the supports already painted): You can print it in…
Charging stand for CMF Watch Pro 2. Wire is hidden within the model. Print with organic supports.
This time, I'm bringing you a stand for the CMF Phone 2 PRO , which can be attached to the phone with its own screws. It's a "print in place" design that allows for color matching by printing the system's internal parts separately. It…
CMF watch pro charging dock. so no more ugly cable in you watch
A custom case designed for CMF buds Pro 2, with features: A lanyard hole A belt clip - but not for belt Physical protection I took advantage of the texture of the plate and printed top and bottom faces towards plate. I will suggest you to…
The .stp model officially released by Nothing can be found here . This prints flat on it's back, with a small amount of support material required just for the holes. This version doesn't have the camera mounts. It is designed as a…
I began designing my CMF Phone 2 Pro case based on the provided mesh. But it sucked hard ;) Bad performance and issues with the converted Object… Additionally, after test printing, I discovered that the large screw would not fit (it was…
Add comfort and ease of use to the CMF Phone 2 Pro with these easy to attach grips. Modeled to match the profile of a standard ps4 Dualsense controller, these grips will make gaming on your phone much more comfortable. Supports should be…
Root Circuit is a back cover concept that makes the invisible visible — transforming internal circuitry into bold, geometric design. The chip, proudly embossed with the "CMF by NOTHING" logo, serves as the visual and conceptual core of…
YouTube Video - link This miniature version of the iconic 2001 BIONICLE canister is designed to perfectly match the new CMF Tahu Cosplayer. It's a fun display accessory that captures the nostalgic look of the original Toa Tahu packaging…
Feel free to ask questions, I have plenty of more Lego files on my profile. Please leave a like! :)
This is a fully 3d printed mechanical lens swapper for the CMF phone 2 pro. Quickly swap between your normal camera and your lens with the spin of a gear! As a bonus, it only adds 1mm of extra thickness vs the normal backplate.…
This is a clip for the CMF Phone 2 Pro Universal cover. This has two models: A card clip that has 2 rails to make sure that your cards can't slide out sideways. A cash clip without the rails.
Hey, I just modeled this on Fusion 360, and I am super happy to share my work with the masses, I just made this which is a sturdy 3D case for CMF earbuds 1. One only needs to attach a simple elastic through the hollow hole, in a loop, and…
CMF case with built in collapsing knife for self defense and utility.
Still a work in progress! I ran out of time because I'm off to the Nova Rock Festival—so the 3D parts and electronics are still incomplete and untested! If you're at the Nova Rock Festival too, feel free to send me a DM—I'd love to meet…
Hey, I just modeled this on Fusion 360, and I am super happy to share my work with the masses, I just made this which is a sturdy 3D case for CMF earbuds 1. One only needs to attach a simple elastic through the hollow hole, in a loop, and…
Elevate your CMF Phone 2 Pro's aesthetic with this meticulously crafted layered decorative underlay. Designed to fit seamlessly beneath the official silicone case, this accessory adds a personalized touch without compromising the phone's…
A CASE FOR ONLY THE HARDEST OF GAMERS WHO SEEK TO PUSH THERE NEW CMF PHONE 2 PROS TO THE LIMIT!!!!!!!!! (now comes with a neat little stand)
Recommended print settings: layer height: 0.2-0.3mm, Infill: 30-50%. Can be printed with a variety of materials.
This back cover design explores the intersection of motion, color, and material , resulting in a striking visual and tactile experience. The surface features a kinetic wave pattern — a flowing topography that subtly shifts in appearance…
This Sun Protection Case for CMF Phone 2 Pro shields your phone from the sun - helping to prevent overheating while you enjoy the outdoors - whether you're at the beach, the pool, or just hanging out with friends on a sunny day! This Sun…
This is a Key Clicker for the CMF Phone 2 Pro contest, its not the most sleek design but it's fun and it works. I hope you like it.
Elevate your device with this eye-catching CMF Phone 2 Pro case, featuring a sleek, futuristic design inspired by geometric aesthetics. Bold triangular patterns and sharp lines create a modern, tech-forward look while offering durable…
WAVE is a visual symphony of flow and function, where aesthetics echo purpose. More than just a cover, it is designed to evoke the calm. With the 'CMF by NOTHING' logo subtly embossed, it forms the visual and conceptual core , a bold…
CMF Watch Pro 2 Wall/Desk Mount – Clean, Functional, and Future-Ready Elevate the way you charge and display your CMF Watch Pro 2 with this sleek, minimalist wall/desk mount designed for seamless integration and effortless style.…
The CMF Watch 3 Pro really impressed me with its price-to-quality ratio — to the point where the perceived quality often feels higher than its price. This model is a mix of two existing designs: a charging dock for CMF Watch 3 Pro from…
Lens cover for the CMF Phone 2 Pro. It fit snugly on the original silicone case that came with the phone. No more scratches from keys and other things in your pocket. I printed it with 3 walls in PLA. It's snug enought to don't come out…
A "case case" for the cmf buds 2 plus by nothing. There isalso a version without the hole but it looks cooler with it in my opinion. Print with PLA with supports turned on (i used "supports for buildplate only" in prusa slicer).
It has magnets imbedded in it, to insert, make a pause in your slicer and insert during the pause. Make sure that you fully insert the magnet, or else the nozzle might catch on the medal. !! - Make sure to turn on manual support to print…
The new Tahu Cosplayer minifig is great - but it's missing proper sword. Print him a new one! Use: 0.15 layer PLA works good SLOW SPEEDS - like 15mm/s Project is not exact original Tahu fire sword replica - it has been modified to be used…
After finding that there were no cases for the CMF Phone 2 Pro that both protected the screen of the phone and looked good, I decided to make my own case. It fits the phone perfectly (as long as you shove it a bit) and doesn't fall off…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
I printed it with AzureFilm TPU 85A 0.2 layer height 0.4 nozzle Added some modifiers to the bottom of the case in slicer so the honeycomb infill is visible
Work in Progress, i wait for my CMF Phone to try it out. If you try it out please let me know
A cut down minifigure head to insert into the DND CMF Mindflayer's pet brain monster. It has a slot in it for a greatsword, you can use an official one or print one yourself. It lets you lodge a sword in that nasty thing to show it its…
Here is a printable CMF Watch Pro 2 Protector/Case You can find 2 models, one for a round ring and the other one for the flat one. I printed it on TPU, but I guess any material is good to go. Recommend a 0.12 layer height for quality at…
Make sure you have supports enabled so the hooks can print! The fit on the hooks is a little tight so you might have to sand them down a tad depending on your printer Also if you do print it don't forget to upload a make!
I like to carry my Buds Pro 2 on my belt or sometimes I like to hook it to my back pack. I've made two different models with each of these uses: one for your pants to hook onto, and one that you can add a keyring to to hook it onto your…
prints without supports in about an hour, face it backwards to your blower fan. charging port snaps into.
It’s simple dock/mount for CMF Buds Pro 2 so you can operate dial during ride. simply use two zip tie to mount base and slide in dock.
It's simple dock for CMF Buds Pro 2 using OG USB-C cable. No supports, 0,2 layer For custom back use provided .3mf file, for different designs just change infill of inner part.
The CMF phone is an awesome value phone that manages to give flagships a run for their money. However, the single feature that it lacked sorely for me is a wireless charging feature. Therefore I designed this cover to accomodate a Qi…
Feel free to ask questions, I have plenty of more Lego files on my profile. Please leave a like! :)
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
This project allows users to attach accessories to the back of CMF Phone1 magnetically instead of screwing things up. It consists of 2 parts: Phone Attachment Plate: It gets screwed to the back of the phone Accessory Attachment Plate: It…
This is my custom design for a case for the CMF By Nothing Buds Pro 2. The case consists of two parts — a top and a bottom — due to the hinge design. While it’s not the most protective case, being quite thin, it does help guard against…
A case made for the CMF Buds pro 2 Very simple print, supports are only needed for the overhang near the knob on the upper lid. Category: Audio
احم سماعات CMF BUDS 1 الخاصة بك بهذا المكان! تصميمها المتين تحافظ على سماعات الأذن الخاصة بك آمنة من الصدمات والخدوش. لا تفوت فرصة الحصول على سماعات الأذن الخاصة بك الآمنة!
These are 2 Gridfinity modules with which you can store the exchangeable bezels of the CMF Watch Pro 2.
Phone wallet for the CMF phone. Ive tried this and you need 2 of the M2X5 screws. NEVER TIGHTEN FULLY OR SCREEN MAY SHATTER!!!!!!!!!!!!!!!!!!
A holder for cmf buds with a gridfinity base with finger slots for ease of access
Just clip your magnetic CMF watch charger to get going.
I designed this charger base for the CMF Watch Pro 2. Its advantage over other stands out there is that it allows you to roll the wire inside of it when it's not needed, since this watch only needs to recharge every few days or even…
I am a motorcyclist and I created this cover for the CMF Buds Pro 2 case to take advantage of the case controls when I am on the move (answer calls, voice assistant, volume control, etc.). These headphones are really great for this…
Behold - my first model made for CMF Phone 1, a rear mounted frame for DAC (or USB-C and 3.5mm jack connector). Simple and needed upgrade that can provide an upgrade to have a fully functional 3.5mm jack to connect your wired headphones.…
Modification of Dan's awesome CMF Watch Pro 2 charging dock, with a few changes: Removal of small holes: I'm not the first to do this! But here it is done cleanly, without cutting off the areas which hold the charging cable. No mesh…
I buyed a metal bracelet for the cmf watch pro 2 but it was too tigh for me even adjusting it so I designed a piece thats extends the bracelet by 3mm and it fitted perfectly for me
Elevate your CMF Phone 2 Pro's aesthetic with this meticulously crafted layered decorative underlay. Designed to fit seamlessly beneath the official silicone case, this accessory adds a personalized touch without compromising the phone's…
Hi, I want to introduce my original shape placed in this brilliant cover. It was made to start prototyping but I think this can be successful model :P You can print it with two colors or AMS IDEX etc. You can swap filaments and make it…
A Backplate for the Cmf Phone 2 Pro theres relly not much more to it. Print it screw it on and have fun with it.
CMF Phone Stand And Finger Holder For On The Go And For Holding Your Phone Up While You Watch Youtube On Your Phone (Don't Deny You Do)
CMF phone PRO 2 Texture kit. I have to thank everyone for sharing their ideas and suggestions! <3<3<3<3<3<3<3<3<3<3<3 Printing settings 45° printing angle 100% infill Support Tree(auto) Top Z distance 0.2mm Support/object xy distance…
Minimal yet fun! It's a multi-material model, so it is recommended to use soluble support and Prusa MK4 for the best result. print it and install it on your phone to stand out, to be different…
added the coolest Autobot ever :) Two 3mf files provided. One, with the image debossed for single color/tool printing, and another with the image set as a separate color/tool for MMU printing.
Designed for people who may have a harder time holding a slim phone. This black plate has a card holder, lanyard clips, and adaptive grip. The grips are wide enough to feel secure and have a groove underneath for a secure finger hold. It…
Have you ever wanted a CMF back cover to fit on the rail of your Ender 3? Well, now you can with this case, you can easily fit your CMF Nothing Phone 2 Pro on the Top rail of your printer and watch videos and many other things. It's even…
The CMF Phone 2 Pro is a great phone but i created the best looking Case for it Based on the Nomad case for Iphone it has it Thicker Bezels and an additional bezel around the camera. I hope you guys find it also a nice model and print it…
This strap joint is designed for the CMF Phone series, including the CMF Phone 1 and CMF Phone 2 Pro. In the v1, the middle part was fixed, but in v2, it can now rotate freely. This makes the screw less likely to come loose. Printing…
Turn your CMF Phone 2 into a MagSafe powerhouse with one print. OrbitFlex drops straight onto the official Universal Cover, adds an ultra-thin N52 magnet ring, and keeps the Nothing aesthetic alive with clean, screw-through styling. Snap…
A CMF Phone 2 Pro Lego Compatible Case For Lego Builders Who Want To Make Unique Things And Put It On Their Phone.
Add your favorite plastic brick accessories to your CMF phone.
This CMF Phone 2 Pro layer cover features a striking portrait of Batman, inspired by The Dark Knight trilogy. The detailed artwork captures the intensity and mystery of Gotham’s silent guardian, making it a perfect accessory for fans of…
Just a humble model of the biggest capacity wallet you can imagine! It holds your entire bank worth of cash!!!
Assemble with an m2.5 threaded insert and threaded rod . Make sure only 4mm or so sticks out the phone side. This should fit both CMF 1 and 2 but I own neither and have no intention to change that.
This model was designed to fit on a tripod by adding a 1/4" 20 nut to the slot.
The cheapest set of ND filters that you will ever find! This 3D printable set of variable ND (neutral density) filters is designed specifically for the CMF Phone 2, allowing you to easily adjust light intake for better photography…
This model is working but not completely finished! The latest version includes the following features: Hidden screw access via hinged lid & below view cutouts. Compatibility for CMF Lanyard. Compatibility for storing CMF Lens accessories.…
This design is simple but practical. Modeled to fit the CMF Phone 2 Pro Case and be sleek to easily fit into your pocket and hold 3 cards. future design will include an RFID blocking feature and a textured design to provide and easy grip…
A back case for the CMF Phone 2 Pro by Nothing, which includes an M2 screwdriver compartment (as well as a printed screwdriver*), a 5-in ruler, and 13 hexagonal holes for different attachments. These holes and hexes have room for magnets…
![LEGO Collectable Minifigures CMF Display Stand [last update 22.08.2023]](https://media.printables.com/media/prints/558091/images/6044596_27b0ed7a-7715-4f84-a932-a1de102331f0_5ed47437-13e9-42ad-a474-f95afcea299a/cmf-25-3.jpg)
