CMF Watch Pro 2 - Charger base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this charger base for the CMF Watch Pro 2 with space to roll the cable inside.
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this charger base for the CMF Watch Pro 2. Its advantage over other stands out there is that it allows you to roll the wire inside of it when it's not needed, since this watch only needs to recharge every few days or even weeks.
It also allows you to press the button to check the time, and use like a bed table clock if you wish.
Coming out with the right shape and print properties was a process, but I managed to get the charger to fit snugly in its holder. It snaps into place, but you might need to push it forward a bit to get a perfect contact. You should be able to make it work perfectly.
This is also my first original design, so I would appreciate it so much if you comment any feedback about the model and the profile.