Stylised Stuka model airplane
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable airplane model that uses printed 608 bearings as wheels
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Standard Digital File License
As my first CAD project, I decided to make a model of the Stuka dive bomber. I have no background in CAD so please share any feedback you might have as I am bound to have made mistakes.
Printing instructions:
For the propeller and fin, i recommend a layer height of 0.12mm and grid supports (tree supports work too but grid was easier to remove)
For every other part, a 0.2mm layer height was used. It should fit any 3d printable bearings and I included some in the project file.
For assembly, the thin rods are used to align the nose, body and tail of the plane. Make sure to glue those parts together. Everything else is a snap fit.
For the wheels, there is no specific place to put them so i used the front wheels to help keep the nose and body stuck together a bit more.