1 / 5
Roland AIRA Compact Sling Case (P-6/S-1/T-8/J-6)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sling your Roland P-6 (S-1/T-8/J-6) across your chest for even more portable jamming.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 511
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This will print a frame that will fit nicely over top of your Roland AIRA Compact device (P-6/S-1/T-8/J-6) while leaving the knobs and buttons exposed for jamming on the go. Hook the ends into a shoulder strap (took mine from an old briefcase) and secure the corners in place with 2 rubber bands.
I used .2 mm layer height with 100% infill. It came out to 25 g of filament. You probably don't need that much infill. You can check the original model for those recommendations as well.