PrusaMINI Filament Sensor Box With PC4-M10 Couplers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A remix of the PrusaMINI filament sensor box, that connects to the Bowden tubes using PC4-M10 couplers.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 181
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
A while back, one of my PrusaXL filament guides' coupler started popping off, and I saw someone posted a version that used PC4-M10 couplers (instead of the cheap metal Bowden collets). Around the same time, my PrusaMINIs had issues that required constant disassembly, including with the filament sensor box (was using weird filament). Not a fan of how the Bowden tubes are fitted into the MINI's sensor box. So I took the bores for the PC4-M10 and put them on the ends of the PrusaMINI's sensor box.
Original sensor box stl files (MINI-fsenzor-box.stl and MINI-fsenzor-cover.stl) were taken from the PrusaMINI GitHub repo.
Teardown and assembly instructions at https://youtu.be/1KWwSi1VSMs
Tools
- M2 driver
- M3 driver
- Pliers or 1cm wrench for the PC4-M10 (or you can just tighten by hand)
Parts
- PC4-M10 Couplers (x2)
- PrusaMINI sensor box parts
- Mostly assuming you already have one with parts you're going to cannibalize
- But also, you can check the GitHub's BOM
Assembly Instructions
See the video included for assembly demo.
For reference, the owner's assembly instructions are found here, but don't go in-depth about the internals.