IKEA Hemnes Drawer Insert Gridfinity
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Gridfinity Insert to your IKEA Hemnes Sliding Drawer
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bedroom
- Licencja
- Creative Commons — Public Domain
I wanted to put a gridfinity insert into the IKEA Hemnes Sliding Drawer but the length and width of the inside of it are not suitable for gridfinity, thus I created an insert to fit a 2x7 gridfinity insert. I modeled it off of the Gridfinity Magnet Light Baseplate by @RIP_PloKoon but I have not tested it with other gridfinity baseplates so keep that in mind.
I have found that the exact dimensions of the drawer insert are not consistent, thus you will have to undo the screws slightly and push the sides closer/farther apart to fit.
Recommended specs:
- 0.20mm
- 2 perimeters
- 0 top and bottom solid layers to have the infill show through