Kärcher MV3/WD3 vacuum crevice nozzle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A crevice nozzle attachment for the Kärcher MV3/WD3 vacuum cleaner
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 106
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement crevice nozzle attachment for the Kärcher MV3/WD3 vacuum cleaner. I lost mine, so created a new one. An important note is that I only have the MV3, but as far as I know the WD3 is identical, so it should also fit on that one. But make sure that its measurements match before you print it for that model. Although I can imagine that nozzle attachments are shared between all Kärcher models, so maybe it fits on others as well.
The total length is 21 cm, and the inner diameter at the bottom is 35.75 cm. The entire nozzle is slightly tapered, so it should be a nice snug fit on the hose end.
I would recommend printing this in PETG as opposed to PLA, for some added strength.