Angled Filament Holder Arm for Qidi Plus 4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled Filament Holder Arm for Qidi Plus 4
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 300
- Wydruki
- 5
- Wyświetlenia
- 964
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Angled Filament Holder Arm for Qidi Plus 4
Note: This model has been remixed by me into a more versatile system that supports multiple mounting orientations. The remixed model can be found here:
https://www.printables.com/model/1328541-versatile-filament-qidi-dry-box-spool-mounting-arm
Description
An easy to print one-piece replacement filament arm holder for the Qidi Plus 4. This angles spools and the Qidi Drybox at a more optimal angle for feeding filament into the printer. It also provides for greater clearance for fitting items like a taller lid riser for better bowden tube clearance within the printer.
The arm slots onto the existing filament arm holder that comes with the printer. The stock spool spindle can also be easy attached to the arm.
Printable in any stiff filament, but I would avoid PLA due to the proximity to the hot chamber.
Use 3 walls, 15% cross-hatch infill, and regular supports. Support are easily removed by simply pushing down on the upper exposed portions once the print is complete.
Support the creator
Enjoying my work? Maybe buy me a coffee! https://ko-fi.com/stew675