Sweeping Name Plate Individual Letters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Individual Letters to create your own sweeping name/text plate.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 148
- Wydruki
- 0
- Wyświetlenia
- 1004
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- 2D Plates & Logos
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Individual Letters to create your own sweeping name/text plate using individual STL files that you can use in Blender, TinkerCAD or other 3D software that works with STL files. You can also print them as is after converting to gCode in slicer.
Files include two "J"'s due to the normal font "J" being a larger letter with the j-hook dropping below the letter baseline.
Also included are some basic plates.
Letters are approx. 45mm tall, 20 mm wide and 40 mm deep.
I have also included the Blender 2.91 file for those familiar with Blender.
I have invested the better part of a day and a half creating these models. I'm not speedy but usually determined.
If you would like to support my model development please consider a small donation to:
I hope you enjoy.
Regards,
Sandy