XTool D1 Pro Pogo-Pin Quick Release Connector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
When switching between XTool blue and IR laser heads, I got really tired of the tiny, fragile "JST" connector. So I'm…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 161
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
When switching between XTool blue and IR laser heads, I got really tired of the tiny, fragile "JST" connector. So I'm using POGO pins magnetic connectors. https://www.aliexpress.us/item/3256804721860036.html Be sure to pick the 2x5, as 9 connections are required. They're amazing, the magnet is strong and the pins are rated for 2 amps each!
When mounting on some heads, one of the screws might be too short. Swap 'em around and make it work. Rather than cut the wires on my XTool, I wired a female JST connector, effectively creating an extension. And if you're concerned about the connector might bump off, use the Clip/Latch too.
Category: Tools