XTool D1 Pro Pogo-Pin Quick Release Connector
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
When switching between XTool blue and IR laser heads, I got really tired of the tiny, fragile "JST" connector. So I'm…
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 17
- Makes
- 0
- Views
- 161
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
When switching between XTool blue and IR laser heads, I got really tired of the tiny, fragile "JST" connector. So I'm using POGO pins magnetic connectors. https://www.aliexpress.us/item/3256804721860036.html Be sure to pick the 2x5, as 9 connections are required. They're amazing, the magnet is strong and the pins are rated for 2 amps each!
When mounting on some heads, one of the screws might be too short. Swap 'em around and make it work. Rather than cut the wires on my XTool, I wired a female JST connector, effectively creating an extension. And if you're concerned about the connector might bump off, use the Clip/Latch too.
Category: Tools