1 / 7
Runcam6 mount for Xcalibur turbine RC jet — zdjęcie 1
1 / 7

Runcam6 mount for Xcalibur turbine RC jet

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount interface to enable the attachment of a Runcam6 camera to the tail of an Xcalibur RC turbine jet (standard size)

Ocena
0 / 5
Polubienia
1
Pobrania
10
Wydruki
0
Wyświetlenia
113
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution

Designed to use the existing wingbolts of the aircraft, it can be mounted on either the left or right side of the tailplane (or both). Runcam6 holder is retained with the separate (green) piece which is screwed down with a countersunk M3 x 8mm screw and the nut is retained in the print.

I printed with ASA for strength and use outdoors when flying. 0.15mm layer height with 4 perimeters, about 10% infill and a brim (because ASA lifts). The main piece was printed with support material under the curved section, as that side is mounted to the wing and is hidden so it doesn't matter how difficult the support material is to take off (I sanded it). The retainer was printed upside down.

The model is a 3MF file with two bodies, just separate them on the print bed or print them separately using the two different files.

I've had almost 20 flights with the camera mounted on the tail with no issues. A couple of flight videos uploaded to YouTube @rustynail252

Tagi