Sprinkler for your garden
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A sprinkler house with anchor and with Gardena compatible connector
- Ocena
- 0 / 5
- Polubienia
- 44
- Pobrania
- 133
- Wydruki
- 0
- Wyświetlenia
- 1147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
This is my very first attempt at building a water sprinkler, so if you have any suggestions for improvements, I would be grateful.
It has 3 x 12 holes (minus one) at angle 30, 45 and 60
An anchor can be attached to the bottom of the sprinkler
The connector is Gardena compatible (among others)
Infill 15%, well don't have to be water tight :-) , the sprinkler house seems to become filled with water and makes it heavy so you may not have to use the anchor.
Attaching an O-Ring for the connector and a flat O-ring as well if you feel you need one, and can print FLEX-material