Sprinkler for your garden
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sprinkler house with anchor and with Gardena compatible connector
- Rating
- 0 / 5
- Likes
- 44
- Downloads
- 133
- Makes
- 0
- Views
- 1,147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This is my very first attempt at building a water sprinkler, so if you have any suggestions for improvements, I would be grateful.
It has 3 x 12 holes (minus one) at angle 30, 45 and 60
An anchor can be attached to the bottom of the sprinkler
The connector is Gardena compatible (among others)
Infill 15%, well don't have to be water tight :-) , the sprinkler house seems to become filled with water and makes it heavy so you may not have to use the anchor.
Attaching an O-Ring for the connector and a flat O-ring as well if you feel you need one, and can print FLEX-material