1 / 3
50mm swivel hose adapter for festool vac and cyclone 90 degree bend
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to be able to use 50mm hose on festool vacuums and cyclone at 90 degree
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 419
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (26)Powiązane
90 degree adapter for Festool vacs and cyclone.
Set consists of 5 parts:
Two halfs of the adapter - screwed together with M3 machine screws approx 10mm long, glue can be added to ensure tight seal
Adapter for the hose
Swivel spacer
Locking plate - screwed to the bottom half using M3 machine screws approx 10mm long
Some painters tape might be used to get a very good seal
Hose used has a thread pitch of 10mm and depth of 4mm
See picture of how to print
Does not fit Festool CTL SYS vacuum without removing top part of vac