1 / 3
50mm swivel hose adapter for festool vac and cyclone 90 degree bend
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adapter to be able to use 50mm hose on festool vacuums and cyclone at 90 degree
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 67
- Makes
- 0
- Views
- 419
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Share Alike
90 degree adapter for Festool vacs and cyclone.
Set consists of 5 parts:
Two halfs of the adapter - screwed together with M3 machine screws approx 10mm long, glue can be added to ensure tight seal
Adapter for the hose
Swivel spacer
Locking plate - screwed to the bottom half using M3 machine screws approx 10mm long
Some painters tape might be used to get a very good seal
Hose used has a thread pitch of 10mm and depth of 4mm
See picture of how to print
Does not fit Festool CTL SYS vacuum without removing top part of vac