50mm swivel hose adapter for festool vac and cyclone 45 degree bend
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to be able to use 50mm hose on festool vacuums and cyclone at 45 degree
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 238
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Share Alike
45 degree adapter for Festool vacs and cyclone.
Set consists of 5 parts:
Two halfs of the adapter - screwed together with M3 machine screws approx 10mm long
Adapter for the hose
Swivel spacer
Locking plate - screwed to the bottom half using M3 machine screws approx 10mm long
Some painters tape might be used to get a very good seal
Hose used has a thread pitch of 10mm and depth of 4mm
See picture of how to print
Might fit Festool CTL SYS vacuum without removing top part of vac, but other systainers cannot be stacked on top
Disclaimer i have not tested this print, but should be the same as my other adapter at 90 degree, only difference is that it is 45 degree and not split in two. The fit is the same.