1 / 3
50mm swivel hose adapter for festool vac and cyclone 45 degree bend — image 1
1 / 3

50mm swivel hose adapter for festool vac and cyclone 45 degree bend

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Adapter to be able to use 50mm hose on festool vacuums and cyclone at 45 degree

Rating
0 / 5
Likes
3
Downloads
29
Makes
0
Views
238
Reviews
0

Updated at source:

Model information

Category
Garage
License
Creative Commons — Attribution — Share Alike

45 degree adapter for Festool vacs and cyclone. 

Set consists of 5 parts:

Two halfs of the adapter - screwed together with M3 machine screws approx 10mm long

Adapter for the hose

Swivel spacer

Locking plate - screwed to the bottom half using M3 machine screws approx 10mm long

Some painters tape might be used to get a very good seal

Hose used has a thread pitch of 10mm and depth of 4mm

See picture of how to print

Might fit Festool CTL SYS vacuum without removing top part of vac, but other systainers cannot be stacked on top

 

Disclaimer i have not tested this print, but should be the same as my other adapter at 90 degree, only difference is that it is 45 degree and not split in two. The fit is the same.

Tags