Isabella camping chair beer holder connector (TPU) - with OpenSCAD-generator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
hirth joint for the Isabella Campingstuhl/camping chair - can be adapted for your own need with the SCAD-File
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 57
- Wydruki
- 0
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is the flexible hirth joiner part for the Isabella campingchair

It should be used with my model
Ultimate modular all-in-one camping chair beer/wineglass/cup holder
https://www.printables.com/model/1269159-ultimate-modular-all-in-one-camping-chair-beerwine
Usage
This should be connected to the beerholder. It's designed with minimum tolerance, because TPU material yields a bit and then it sits tightly.
The holes are for velcro cable ties like this one from Lidl → https://www.lidl.de/p/parkside-klett-kabelbinder-wiederverwendbar/p100359340
Printing
I used following filament for the print with shore hardness of A98
In the 3mf-file I've used 60% gyroid infill, so the hirth-part is stiff enough to hold the beerholder part.
OpenSCAD
You can make you own model for your chair with the attached OpenSCAD-File.