1 / 1
Canon RF-S 18-45mm F/4.5 Rectangular Lens Hood
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rectangular Lens Hood for the kit lens that comes with the Canon R50 (inner ⌀49mm, outer ⌀53mm)
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 165
- Wydruki
- 0
- Wyświetlenia
- 505
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This is a modification of the "Canon 50mm F/1.8 Rectangular Lens Hood". It's been scaled down to fit the Canon R50 kit lens, rotated the bayonet mount 90deg so it'd mount rotated at correct orientation.
I printed this in PETG-CF at 0.1mm layer height, infill 20%, and no brim. If you are printing with PETG and have issues with it adhering to your bed, either increase bed temp or add a brim.