FAO Schwarz Ride-On Train Set Track Pieces
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additional pieces to expand and change the track layout.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My friend got this set for his grand kids, but the tracks included only let you make a circle or oval. The curve pieces only allow for turns in the same direction because of the connectors. He asked if there was a way to make curves that went the other direction. I tried, but it was easier to make pieces that let him use the original curves, but reversed the connectors so he could rotate a curve piece and it would work. It required two transition pieces: one to make the curve go one way, and another to make it turn back the other way.
Once you turn the other way, you also have to put the straight pieces on backwards until you use the other transition piece to turn back.
While I was at it, I made a straight piece so he could make the track as long as he wanted.
Here's a link to the playset (just so you can see what it is): https://thetoyinsider.com/products/fao-schwarz-ride-on-railway/
The curve transitions can be printed on an Ender 3 bed. The straight piece is too big (261mm).You can scale the length to 80%, but make sure that you uncheck "Uniform Scaling" (Cura) or whatever the proportional scaling is on your slicer so the other two dimensions don't change.